Blog

A Bakery Floor Built to Last A premier baking facility faced significant challenges with its bare concrete floor, which had become pitted and corroded due to years of exposure to high heat and fr

Before the Transformation The firehouse's Ready Room floor had aged poorly, with old VCT tiles that were slick and difficult to maintain. The team needed a solution that ensured safety during eme

Opening Thoughts Before applying a floor coating, ensure proper preparation to avoid premature failure. Begin by assessing the floor's condition, identifying contaminants like oil or grease, and

Opening Thoughts In this video, the renovation of a hotel kitchen floor is showcased, focusing on addressing water leakage and enhancing durability. The project began with excavating the concrete

Introduction The video below showcases the application of MORTARTHANE™ HF, a urethane cement floor resurfacer, in a baking facility's production area. Despite the challenging 18-inch cleara

Opening Thoughts Ensuring a watertight and contaminant-free seal between concrete walls and floor joints is essential, especially in environments requiring stringent hygiene standards. Utilizing

Step-by-Step Guide to Applying Epoxy Floor Coatings in High-Traffic Areas  Step 1: Surface Preparation:  Cleaning: Thoroughly remove all debris, grease, and contaminants from the concrete f

A Hot Environment Needs a Tougher Floor Inside this busy commercial bakery, the oven room floor had become a serious issue. Years of heat exposure and daily hot water washdowns left the concrete

A Fresh Look Without Breaking the Bank A new restaurant with a stained concrete floor in its sports bar area needed a solution that preserved the floor’s tile-like design, boosted appearanc

In a recent project at a fish processing facility, the concrete production room floor underwent a significant transformation. The existing floor, previously slick and slippery, was resurfaced with a c

The Challenge Maintaining a safe and hygienic environment in food manufacturing freezers is essential, especially where floor and wall joints are concerned. This blog highlights the importance of

Introduction In cold storage environments like walk-in coolers, bare concrete floors face the challenge of thermal cycling, which can lead to deterioration. Mortarthane™ HF, a cement-based