Floor Coatings | Garon Products Inc.

Inspection coming up? Get ready by installing a high-performance, sanitary floor coating without facility shutdowns, or specialized experience

How to make your floor stand up to chemical exposure — including acid attack

Three ways to make worn, cracked, rough surface floors look showroom new — even with high traffic

Get safe against slips, falls, and vehicle skidding — even when wet! Use any one of our top 3 anti-slip coatings

Best For Application Speed & Inspection Prep — GARON GUARD™ self-primes, cuts application time, simple roller application.
Ultra-Thick Coating — POUR-N-WALK™ self-levels and hides floor imperfections. Smooths entire surface in a single coat (62 mills thick). High impact resistance.
Toughest Abrasion Resistance — TIGERSHIELD™ easy roller or squeegee application. Perfect for heavy traffic aisle-ways and guards against scratching and marring from heavy traffic.

Tigershield™ provides excellent mar and abrasion resistance.

Best Sealer For a Non-Glare Application — TIGERSKIN™ epoxy formula gives excellent coverage with good abrasion resistance and non-glare finish.
Best For Sealing Floors That Need Extra Traction — For wet areas requiring extra foot traffic saftey use TIGERTRED™. Quick, easy roller application.
Best For Sealing On Top of Other Coatings — CONCORD's™ one-component formula seals over uncoated concrete and existing coatings like latex, and oil-based paints. Budget-friendly formula. Simple roller application.

Tigerskin™ makes old, worn floors look new

Best For General Splash and Spill Chemical Contact — POUR-N-WALK™ CR withstands acid and chemical exposure.
Best For Aggressive Chemical Contact and Immersion — NUTRACID™ withstands harsh chemical and acid attack - even immersion exposure, secondary containment. Simple roller application.

Nutracid™ protection assured in an acid spill area

Floors Requiring Low Downtime — FAST CURE™ puts active floor areas back into service after coating in as little as 8 to 12 hours.
Low Temperature Areas — ACCELARESIN™ coats floor without shutting down refrigeration - cures in temperatures as low as 30° F in 3 to 5 hours.

Accelaresin™ applied to production room floor —fastest-set coating available

Heavy Duty Traffic — STOP-SLIP™ HD vehicular grade epoxy coating.
Foot Traffic Areas — For extreme and durability. STOP-SLIP™ LTB low profile traction for barefoot traffic areas, swimming, spa, recreation.
Extreme Traffic Anti-Slip — STOP-SLIP™ HDV provides maximum anti-slip profile for industrial, military, institutional use.

TIP: If all you need is some added traction for your floor, start with one of our other floor coatings and add traction grit.