WATERSTOP™ CP
Concrete Masonry Resurfacer
Withstands Hydrostatic Pressure
$265.00
- Weight per unit
- 63.00 LBS
Description
WATERSTOP™ CP is a polymer modified Waterproof masonry coating containing portland cement sized aggregates. WATERSTOP™ CP is applied in one coat by trowel, dry process shotcrete, or multibrush application to block, brick, concrete or stone. It will waterproof from the interior wall even under instances of hydrostatic pressure, as well as waterproof from the exterior side of the wall.
- Eliminates water and dampness in basements
- Versatile applications
- Use as a base for moisture sensitive coatings
-
Product Info
Coverage 42 sq. ft. at 1/8" applied by trowel. 85 sq. ft. at 1/16" applied by brush. Cure Schedule @ 70F: 12-24 hours initial set. Application FLAT TROWEL, brush or roller Weight per unit 63.00 LBS Packaging Pre-measured 5 gal kit for easy application; Components Include: 50 lbs powder. -
Typical Uses
Typical Uses - Precast; block; stucco and masonry
- Over brick or porous stone surfaces; interior or exterior
- Above or below grade
- Vertical or horizontal surfaces
- Base for moisture sensitive coatings
-
See it in Action!
-
Tech Data
Safety Data Download Safety Data Sheet Product Data Download Data Sheet - Related Products
| Item # | 12002 |
|---|---|
| Coverage | 42 sq. ft. at 1/8" applied by trowel. 85 sq. ft. at 1/16" applied by brush. |
| Cure Schedule | @ 70F: 12-24 hours initial set. |
| Application | FLAT TROWEL, brush or roller |
| Weight per unit | 63.00 LBS |
| Packaging | Pre-measured 5 gal kit for easy application; Components Include: 50 lbs powder. |
|---|
| Typical Uses |
|
|---|
| Safety Data | Download Safety Data Sheet |
|---|---|
| Product Data | Download Data Sheet |